1. Home /
  2. Les enchères /
  3. BelGaN waferfab process mainframes

BelGaN waferfab process mainframes

Numéro d'enchère
3965
Partager cette page:

BelGaN waferfab process mainframes: 
Lithography, CVD, Epitaxy, Implant, Metrology, Plasma etch, Furnace, Wet Chemical Process, WCVD, partsclean 

Total liquidation of a 5000m² waferfab cleanroom and supporting facilities due to Bankruptcy. 
BelGaN fab ran a mix of 150 and 200mm BCD Si and GaN. 
 

Lot overview - List of lots in PDF:
https://res.cloudinary.com/dltpgmjmq/image/upload/q_auto:good/user-media-prod/Mainframes_list_lots_bgkopc
 

Practical information:

to plan a visit : tim@openbare-verkopen.be

for all technical questions about the tools : johan.vercammen@belgan.com

De-installation:

All standard cleaning/decontamination and disconnecting from the fab is at cost of supplier and will be done before end of auction. 
Any costs related to preparing the tool for shipment (locking kit, separating the tool in multiple parts, removing cables between the different parts of the tool, etc), rigging, crating and shipping will be at cost of buyer. Tools are decommissioned by the BelGaN tool technicians, which includes removing and cleaning residual gases and chemicals, and disconnecting the tool from BelGaN Facilities. Openbare Verkopen can provide general technical support for the removal process, such as disconnecting signal cables between different process modules. Please inquire for a quote if needed. Tool-specific actions, like installing transport locking kits, must be done by the buyer.

Preferred partners:

Lifthing: removal ex-factory :

pieterjan@lifthing.com

Deufol : transport to Deufol hub Antwerp, maritime packing, transport to the port, shipping to destination and customs formalities.

deufol.belgium.sales@deufol.com

Please send all general questions about pick up to belgan.pickup@online-auctions.be

Visiting days: 

On appointment between December 2th and January 8th. 

Payment: 

Final due date of payment 50% by Jan 31st , balance by febr 28th. With full payment before pick up !

Pickup: 

Before end of March. Schedule will be published after completion of the auction and will be dependent on number of tools bought, placement in the fab and timely payment.   

FANC certificate of compliance HC Tools:

There is an obligation to fill in a FANC DOC for lots:
1, 19, 20, 21, 59, 86, 87

Link to doc:
https://qr.scanned.page/uploads/pdf/1733409716731_6751baae7a76d.pdf

End user statement documents:

There is an obligation to sign an end user statement for each tool
 Link to doc:
https://qr.scanned.page/uploads/pdf/1733409198497_6751b9997230b.pdf

 

 

 

Commence le :
30/11/2024 19:00 CET
Se termine à partir de :
09/01/2025 15:00 CET
Tous les jours de visite et de collecte

Précisez votre recherche

                            Lots (292)

                            C Axcelis Axcelis Purion M - 150mm Implant
                            Numéro de lot 1
                            C Axcelis Axcelis Purion M - 150mm Implant
                            Numéro de lot 1
                            2 offres
                            Axcelis Axcelis Purion M - Implant

                            Vintage: 2024
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: MC4

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 360 x 810 x 310
                            Mainframe weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 780.000
                            C KLA ALTAIR 8920 - 150/200mm Defect inspection system
                            Numéro de lot 2
                            C KLA ALTAIR 8920 - 150/200mm Defect inspection system
                            Numéro de lot 2
                            12 offres
                            KLA ALTAIR 8920 - Defect inspection system

                            Vintage: 2017
                            SN: 252/220
                            Wafersize: 150 and 200mm
                            Former BelGaN MES/ERP name: ALTAIR1

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 185 x 222 x 295
                            Mainframe weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 700.500
                            C Canon FPA 3000 i5+ - 150mm I-line Stepper
                            Numéro de lot 3
                            C Canon FPA 3000 i5+ - 150mm I-line Stepper
                            Numéro de lot 3
                            1 offres
                            Canon FPA 3000 i5+ - I-line Stepper

                            Vintage: 2000
                            SN: 112664
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: STEPPER18

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 191 x 265 x 256
                            Mainframe weight (kg): 2700

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 500.000
                            C Canon FPA 3000 I5+ - 150mm I-line Stepper
                            Numéro de lot 4
                            C Canon FPA 3000 I5+ - 150mm I-line Stepper
                            Numéro de lot 4
                            1 offres
                            Canon FPA 3000 I5+ - I-line Stepper

                            Vintage: 2001
                            SN: 1042754
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: STEPPER9

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 202 x 275 x 255
                            Mainframe weight (kg): 2700

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 500.000
                            C Applied Materials Endura PVD 5500 - 200mm Metal deposition
                            Numéro de lot 5
                            C Applied Materials Endura PVD 5500 - 200mm Metal deposition
                            Numéro de lot 5
                            30 offres
                            Applied Materials Endura PVD 5500 - Metal deposition

                            Vintage: 1992
                            Wafersize: 200mm
                            Former BelGaN MES/ERP name: SPUTTER1

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 127 x 96 x 89
                            Mainframe weight (kg): 3400
                            Bypack1 dim (cm): 53 x 44 x 94
                            Bypack1 weight (kg): 800
                            Bypack2 dim (cm): 62 x 56 x 77
                            Bypack2 weight (kg): 600
                            Bypack3 dim (cm): 62 x 56 x 77
                            Bypack3 weight (kg): 630
                            Bypack4 dim (cm): 52 x 34 x 36
                            Bypack4 weight (kg): 270
                            Bypack5 dim (cm): 38 x 38 x 47
                            Bypack5 weight (kg): 130
                            Bypack6 dim (cm): 96 x 48 x 72
                            Bypack6 weight (kg): 500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 500.000
                            C Aixtron G10+ - 150mm Epitaxy
                            Numéro de lot 6
                            C Aixtron G10+ - 150mm Epitaxy
                            Numéro de lot 6
                            1 offres
                            Aixtron G10+ - Epitaxy

                            Wafersize: 150mm
                            200mm convertible: Yes
                            Chambers/configuration: 1
                            Former BelGaN MES/ERP name: MOCVD

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 145 x 150 x 160
                            Mainframe weight (kg):
                            Bypack1 dim (cm): 240 x 135 x 210
                            Bypack1 weight (kg):
                            Bypack2 dim (cm): 185 x 270 x 255
                            Bypack2 weight (kg):
                            Bypack3 dim (cm): 40 x 85 x 87
                            Bypack3 weight (kg):
                            Bypack4 dim (cm): 45 x 70 x 80
                            Bypack4 weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 1.500.000
                            C Canon FPA 3000 i5+ - 150mm I-line Stepper
                            Numéro de lot 7
                            C Canon FPA 3000 i5+ - 150mm I-line Stepper
                            Numéro de lot 7
                            28 offres
                            Canon FPA 3000 i5+ - I-line Stepper

                            Vintage: 2007
                            SN: 7072885
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: STEPPER12

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 191 x 265 x 256
                            Mainframe weight (kg): 2700

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 720.000
                            C Canon FPA 3000 i5 - 150mm I-line Stepper
                            Numéro de lot 8
                            C Canon FPA 3000 i5 - 150mm I-line Stepper
                            Numéro de lot 8
                            1 offres
                            Canon FPA 3000 i5 - I-line Stepper

                            Vintage: 1997
                            SN: 7122157
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: STEPPER16

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 191 x 265 x 256
                            Mainframe weight (kg): 2700

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 400.000
                            C Canon FPA 3000 i5 - 150mm I-line Stepper
                            Numéro de lot 9
                            C Canon FPA 3000 i5 - 150mm I-line Stepper
                            Numéro de lot 9
                            1 offres
                            Canon FPA 3000 i5 - I-line Stepper

                            Vintage: 1998
                            SN: 8032195
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: STEPPER17

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 191 x 265 x 256
                            Mainframe weight (kg): 2700

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 400.000
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 10
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 10
                            4 offres
                            Applied Materials Endura PVD 5500 - Metal deposition

                            Vintage: 2000
                            SN: 302906
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SP10

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 127 x 96 x 89
                            Mainframe weight (kg): 3400
                            Bypack1 dim (cm): 53 x 44 x 94
                            Bypack1 weight (kg): 800
                            Bypack2 dim (cm): 62 x 56 x 77
                            Bypack2 weight (kg): 600
                            Bypack3 dim (cm): 62 x 56 x 77
                            Bypack3 weight (kg): 630
                            Bypack4 dim (cm): 52 x 34 x 36
                            Bypack4 weight (kg): 270
                            Bypack5 dim (cm): 38 x 38 x 47
                            Bypack5 weight (kg): 130
                            Bypack6 dim (cm): 96 x 48 x 72
                            Bypack6 weight (kg): 500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 422.500
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 11
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 11
                            0 offres
                            Applied Materials Endura PVD 5500 - Metal deposition

                            Vintage: 1995+/-5j
                            SN: 3155
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SP11

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 127 x 96 x 89
                            Mainframe weight (kg): 3400
                            Bypack1 dim (cm): 53 x 44 x 94
                            Bypack1 weight (kg): 800
                            Bypack2 dim (cm): 62 x 56 x 77
                            Bypack2 weight (kg): 600
                            Bypack3 dim (cm): 62 x 56 x 77
                            Bypack3 weight (kg): 630
                            Bypack4 dim (cm): 52 x 34 x 36
                            Bypack4 weight (kg): 270
                            Bypack5 dim (cm): 38 x 38 x 47
                            Bypack5 weight (kg): 130
                            Bypack6 dim (cm): 96 x 48 x 72
                            Bypack6 weight (kg): 500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 400.000
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 12
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 12
                            0 offres
                            Applied Materials Endura PVD 5500 - Metal deposition

                            Vintage: 1994
                            SN: 3376
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SPUTTER2

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 127 x 96 x 89
                            Mainframe weight (kg): 3400
                            Bypack1 dim (cm): 53 x 44 x 94
                            Bypack1 weight (kg): 800
                            Bypack2 dim (cm): 62 x 56 x 77
                            Bypack2 weight (kg): 600
                            Bypack3 dim (cm): 62 x 56 x 77
                            Bypack3 weight (kg): 630
                            Bypack4 dim (cm): 52 x 34 x 36
                            Bypack4 weight (kg): 270
                            Bypack5 dim (cm): 38 x 38 x 47
                            Bypack5 weight (kg): 130
                            Bypack6 dim (cm): 96 x 48 x 72
                            Bypack6 weight (kg): 500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 400.000
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 13
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 13
                            0 offres
                            Applied Materials Endura PVD 5500 - Metal deposition

                            Vintage: 1994
                            SN: 3527
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SPUTTER3

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 127 x 96 x 89
                            Mainframe weight (kg): 3400
                            Bypack1 dim (cm): 53 x 44 x 94
                            Bypack1 weight (kg): 800
                            Bypack2 dim (cm): 62 x 56 x 77
                            Bypack2 weight (kg): 600
                            Bypack3 dim (cm): 62 x 56 x 77
                            Bypack3 weight (kg): 630
                            Bypack4 dim (cm): 52 x 34 x 36
                            Bypack4 weight (kg): 270
                            Bypack5 dim (cm): 38 x 38 x 47
                            Bypack5 weight (kg): 130
                            Bypack6 dim (cm): 96 x 48 x 72
                            Bypack6 weight (kg): 500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 400.000
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 14
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 14
                            0 offres
                            Applied Materials Endura PVD 5500 - Metal deposition

                            Vintage: 1995
                            SN: 3984
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SPUTTER4

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 127 x 96 x 89
                            Mainframe weight (kg): 3400
                            Bypack1 dim (cm): 53 x 44 x 94
                            Bypack1 weight (kg): 800
                            Bypack2 dim (cm): 62 x 56 x 77
                            Bypack2 weight (kg): 600
                            Bypack3 dim (cm): 62 x 56 x 77
                            Bypack3 weight (kg): 630
                            Bypack4 dim (cm): 52 x 34 x 36
                            Bypack4 weight (kg): 270
                            Bypack5 dim (cm): 38 x 38 x 47
                            Bypack5 weight (kg): 130
                            Bypack6 dim (cm): 96 x 48 x 72
                            Bypack6 weight (kg): 500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 400.000
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 15
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 15
                            9 offres
                            Applied Materials Endura PVD 5500 - Metal deposition

                            Vintage: 2002
                            SN: 305329
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SPUTTER5

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 127 x 96 x 89
                            Mainframe weight (kg): 3400
                            Bypack1 dim (cm): 53 x 44 x 94
                            Bypack1 weight (kg): 800
                            Bypack2 dim (cm): 62 x 56 x 77
                            Bypack2 weight (kg): 600
                            Bypack3 dim (cm): 62 x 56 x 77
                            Bypack3 weight (kg): 630
                            Bypack4 dim (cm): 52 x 34 x 36
                            Bypack4 weight (kg): 270
                            Bypack5 dim (cm): 38 x 38 x 47
                            Bypack5 weight (kg): 130
                            Bypack6 dim (cm): 96 x 48 x 72
                            Bypack6 weight (kg): 500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 460.000
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 16
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 16
                            0 offres
                            Applied Materials Endura PVD 5500 - Metal deposition

                            Vintage: 1994
                            SN: 3321
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SPUTTER6

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 127 x 96 x 89
                            Mainframe weight (kg): 3400
                            Bypack1 dim (cm): 53 x 44 x 94
                            Bypack1 weight (kg): 800
                            Bypack2 dim (cm): 62 x 56 x 77
                            Bypack2 weight (kg): 600
                            Bypack3 dim (cm): 62 x 56 x 77
                            Bypack3 weight (kg): 630
                            Bypack4 dim (cm): 52 x 34 x 36
                            Bypack4 weight (kg): 270
                            Bypack5 dim (cm): 38 x 38 x 47
                            Bypack5 weight (kg): 130
                            Bypack6 dim (cm): 96 x 48 x 72
                            Bypack6 weight (kg): 500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 400.000
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 17
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 17
                            0 offres
                            Applied Materials Endura PVD 5500 - Metal deposition

                            Vintage: 1996
                            SN: 3993
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SPUTTER7

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 127 x 96 x 89
                            Mainframe weight (kg): 3400
                            Bypack1 dim (cm): 53 x 44 x 94
                            Bypack1 weight (kg): 800
                            Bypack2 dim (cm): 62 x 56 x 77
                            Bypack2 weight (kg): 600
                            Bypack3 dim (cm): 62 x 56 x 77
                            Bypack3 weight (kg): 630
                            Bypack4 dim (cm): 52 x 34 x 36
                            Bypack4 weight (kg): 270
                            Bypack5 dim (cm): 38 x 38 x 47
                            Bypack5 weight (kg): 130
                            Bypack6 dim (cm): 96 x 48 x 72
                            Bypack6 weight (kg): 500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 400.000
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 18
                            C Applied Materials Endura PVD 5500 - 150mm Metal deposition
                            Numéro de lot 18
                            1 offres
                            Applied Materials Endura PVD 5500 - Metal deposition

                            Vintage: 1998
                            SN: 450
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SPUTTER8

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 127 x 96 x 89
                            Mainframe weight (kg): 3400
                            Bypack1 dim (cm): 53 x 44 x 94
                            Bypack1 weight (kg): 800
                            Bypack2 dim (cm): 62 x 56 x 77
                            Bypack2 weight (kg): 600
                            Bypack3 dim (cm): 62 x 56 x 77
                            Bypack3 weight (kg): 630
                            Bypack4 dim (cm): 52 x 34 x 36
                            Bypack4 weight (kg): 270
                            Bypack5 dim (cm): 38 x 38 x 47
                            Bypack5 weight (kg): 130
                            Bypack6 dim (cm): 96 x 48 x 72
                            Bypack6 weight (kg): 500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 400.000
                            C Axcelis GDS VHE - 150mm Implant
                            Numéro de lot 19
                            C Axcelis GDS VHE - 150mm Implant
                            Numéro de lot 19
                            34 offres
                            Axcelis GDS VHE - Implant

                            Vintage: 2001
                            SN: VHE57
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: MEV1

                            Dimensions & weight estimates:not yet available

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 965.000
                            C Applied Materials 9500XR - 150mm Implanter
                            Numéro de lot 20
                            C Applied Materials 9500XR - 150mm Implanter
                            Numéro de lot 20
                            26 offres
                            Applied Materials 9500XR - Implanter

                            Vintage: 1999
                            SN: M266
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: HC2

                            Dimensions & weight estimates:not yet available

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 750.000
                            C Applied Materials 9500XR - 150mm Implanter
                            Numéro de lot 21
                            C Applied Materials 9500XR - 150mm Implanter
                            Numéro de lot 21
                            30 offres
                            Applied Materials 9500XR - Implanter

                            Vintage: 1993
                            SN: M160
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: HC3

                            Dimensions & weight estimates:not yet available

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 610.000
                            C Applied Materials Centura DPS - 150mm Plasma Etch
                            Numéro de lot 22
                            C Applied Materials Centura DPS - 150mm Plasma Etch
                            Numéro de lot 22
                            2 offres
                            Applied Materials Centura DPS - Plasma Etch

                            Vintage: 1999
                            SN: 9104
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: polypets, nitridepets
                            Former BelGaN MES/ERP name: CENTURA3

                            Dimensions & weight estimates:not yet available

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 302.500
                            C Applied Materials Centura DPS - 150mm Plasma Etch
                            Numéro de lot 23
                            C Applied Materials Centura DPS - 150mm Plasma Etch
                            Numéro de lot 23
                            21 offres
                            Applied Materials Centura DPS - Plasma Etch

                            Vintage: 2001
                            SN: 321932
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: polypets, nitridepets
                            Former BelGaN MES/ERP name: CENTURA9

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 240 x 215 x 245
                            Mainframe weight (kg):
                            Bypack1 dim (cm): 95 x 115 x 210
                            Bypack1 weight (kg):
                            Bypack2 dim (cm): 61 x 110 x 170
                            Bypack2 weight (kg):
                            Bypack3 dim (cm): 40 x 85 x 100
                            Bypack3 weight (kg):
                            Bypack4 dim (cm): 40 x 85 x 100
                            Bypack4 weight (kg):
                            Bypack5 dim (cm): 55 x 100 x 100
                            Bypack5 weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 360.000
                            C Applied Materials 5200 HDP Centura - 150mm CVD
                            Numéro de lot 24
                            C Applied Materials 5200 HDP Centura - 150mm CVD
                            Numéro de lot 24
                            60 offres
                            Applied Materials 5200 HDP Centura - CVD

                            Vintage: 2000
                            SN: 308123
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Chambers/configuration: 2
                            Former BelGaN MES/ERP name: CENTURA10

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 172.3 x 225.4 x 242
                            Mainframe weight (kg): 1500
                            Bypack1 dim (cm): 57 x 95 x 105
                            Bypack1 weight (kg):
                            Bypack2 dim (cm): 80 x 120 x 170
                            Bypack2 weight (kg):
                            Bypack3 dim (cm): 57 x 95 x 105
                            Bypack3 weight (kg):
                            Bypack4 dim (cm): 95 x 115 x 210
                            Bypack4 weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 575.000
                            C Applied Materials 5200 HDP Centura - 150mm CVD
                            Numéro de lot 25
                            C Applied Materials 5200 HDP Centura - 150mm CVD
                            Numéro de lot 25
                            15 offres
                            Applied Materials 5200 HDP Centura - CVD

                            Vintage: 1997
                            SN: C068B
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Chambers/configuration: 2
                            Former BelGaN MES/ERP name: CENTURA2

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 172.3 x 225.4 x 242
                            Mainframe weight (kg): 1500
                            Bypack1 dim (cm): 107 x 91 x 208
                            Bypack1 weight (kg): 1390

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 312.500
                            C Applied Materials 5200 HDP Centura - 150mm CVD
                            Numéro de lot 26
                            C Applied Materials 5200 HDP Centura - 150mm CVD
                            Numéro de lot 26
                            5 offres
                            Applied Materials 5200 HDP Centura - CVD

                            Vintage: 2000
                            SN: 308467
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Chambers/configuration: 2
                            Former BelGaN MES/ERP name: CENTURA5

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 172.3 x 225.4 x 242
                            Mainframe weight (kg): 1500
                            Bypack1 dim (cm): 107 x 91 x 208
                            Bypack1 weight (kg): 1390

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 262.500
                            C Applied Materials Centura DTI - 150mm Plasma Etch
                            Numéro de lot 27
                            C Applied Materials Centura DTI - 150mm Plasma Etch
                            Numéro de lot 27
                            1 offres
                            Applied Materials Centura DTI - Plasma Etch

                            Vintage: 2003
                            SN: EB36
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: trenchpets
                            Former BelGaN MES/ERP name: CENTURA4

                            Dimensions & weight estimates:not yet available

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 250.000
                            C Applied Materials 5200 Centura - 150mm CVD
                            Numéro de lot 28
                            C Applied Materials 5200 Centura - 150mm CVD
                            Numéro de lot 28
                            0 offres
                            Applied Materials 5200 Centura - CVD

                            Vintage: 1997
                            SN: 9320
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Chambers/configuration: 3
                            Former BelGaN process: pecvd, peteos
                            Former BelGaN MES/ERP name: CENT13

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 250 x 240 x 245
                            Mainframe weight (kg):
                            Bypack1 dim (cm): 52 x 75 x 75
                            Bypack1 weight (kg):
                            Bypack2 dim (cm): 52 x 75 x 75
                            Bypack2 weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 200.000
                            C Canon FPA 3000 I4 - 150mm I-line Stepper
                            Numéro de lot 29
                            C Canon FPA 3000 I4 - 150mm I-line Stepper
                            Numéro de lot 29
                            22 offres
                            Canon FPA 3000 I4 - I-line Stepper

                            Vintage: 1995
                            SN: 512702i4
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: STEPPER5

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 202 x 275 x 255
                            Mainframe weight (kg): 2700

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 275.000
                            C Canon FPA 3000 I4 - 150mm I-line Stepper
                            Numéro de lot 30
                            C Canon FPA 3000 I4 - 150mm I-line Stepper
                            Numéro de lot 30
                            33 offres
                            Canon FPA 3000 I4 - I-line Stepper

                            Vintage: 1995
                            SN: 506496i4
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: STEPPER6

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 202 x 275 x 255
                            Mainframe weight (kg): 2700

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 307.500
                            C Canon FPA 3000 I4 - 200mm I-line Stepper
                            Numéro de lot 31
                            C Canon FPA 3000 I4 - 200mm I-line Stepper
                            Numéro de lot 31
                            4 offres
                            Canon FPA 3000 I4 - I-line Stepper

                            Vintage: 1996
                            SN: 57572
                            Wafersize: 200mm
                            Former BelGaN MES/ERP name: STEPPER8

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 202 x 275 x 255
                            Mainframe weight (kg): 2700

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 207.500
                            C Applied Materials Centura DTI - 150mm Plasma Etch
                            Numéro de lot 32
                            C Applied Materials Centura DTI - 150mm Plasma Etch
                            Numéro de lot 32
                            1 offres
                            Applied Materials Centura DTI - Plasma Etch

                            Vintage: 1998+/-1j
                            SN: 9060
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: trenchpets
                            Former BelGaN MES/ERP name: CENT11

                            Dimensions & weight estimates:not yet available

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 200.000
                            C Applied Materials 5200 Centura - 150mm WCVD
                            Numéro de lot 33
                            C Applied Materials 5200 Centura - 150mm WCVD
                            Numéro de lot 33
                            1 offres
                            Applied Materials 5200 Centura - WCVD

                            Vintage: 1997
                            SN: 9073
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Chambers/configuration: 2 deposition + 2 etch
                            Former BelGaN MES/ERP name: CENT12

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 250 x 240 x 245
                            Mainframe weight (kg):
                            Bypack1 dim (cm): 110 x 175 x 230
                            Bypack1 weight (kg):
                            Bypack2 dim (cm): 40 x 80 x 100
                            Bypack2 weight (kg):
                            Bypack3 dim (cm): 41 x 130 x 100
                            Bypack3 weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 200.000
                            C Applied Materials 5200 Centura - 150mm WCVD
                            Numéro de lot 34
                            C Applied Materials 5200 Centura - 150mm WCVD
                            Numéro de lot 34
                            0 offres
                            Applied Materials 5200 Centura - WCVD

                            Vintage: 1996
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Chambers/configuration: 2 deposition + 2 etch
                            Former BelGaN MES/ERP name: CENTURA1

                            Dimensions & weight estimates:not yet available

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 200.000
                            C Applied Materials 5200 Centura - 150mm WCVD
                            Numéro de lot 35
                            C Applied Materials 5200 Centura - 150mm WCVD
                            Numéro de lot 35
                            0 offres
                            Applied Materials 5200 Centura - WCVD

                            Vintage: 1996
                            SN: 5991
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Chambers/configuration: 2 deposition + 2 etch
                            Former BelGaN MES/ERP name: CENTURA6

                            Dimensions & weight estimates:not yet available

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 200.000
                            C NexGen MG22 MG22 - 150mm Spinetser
                            Numéro de lot 36
                            C NexGen MG22 MG22 - 150mm Spinetser
                            Numéro de lot 36
                            0 offres
                            NexGen MG22 MG22 - Spinetser

                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SEZ4

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 180 x 255 x 255
                            Mainframe weight (kg):
                            Bypack1 dim (cm): 145 x 70 x 200
                            Bypack1 weight (kg):
                            Bypack2 dim (cm): 285 x 100 x 195
                            Bypack2 weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 200.000
                            C Hitachi Hitatchi S 9220 - 150mm CD measurement
                            Numéro de lot 37
                            C Hitachi Hitatchi S 9220 - 150mm CD measurement
                            Numéro de lot 37
                            74 offres
                            Hitachi Hitatchi S 9220 - CD measurement

                            Vintage: 2000
                            SN: 9727-10
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SEM5

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 120 x 200 x 190
                            Mainframe weight (kg): 2000
                            Bypack1 dim (cm): 60 x 130 x 190
                            Bypack1 weight (kg): 340
                            Bypack2 dim (cm): 80 x 54 x 190
                            Bypack2 weight (kg): 380
                            Bypack3 dim (cm): 27 x 40 x 65
                            Bypack3 weight (kg): 80

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 442.500
                            C Hitachi Hitatchi S 9220 - 150mm CD measurement
                            Numéro de lot 38
                            C Hitachi Hitatchi S 9220 - 150mm CD measurement
                            Numéro de lot 38
                            34 offres
                            Hitachi Hitatchi S 9220 - CD measurement

                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: SEM6

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 120 x 200 x 190
                            Mainframe weight (kg): 2000
                            Bypack1 dim (cm): 60 x 130 x 190
                            Bypack1 weight (kg): 340
                            Bypack2 dim (cm): 80 x 54 x 190
                            Bypack2 weight (kg): 380
                            Bypack3 dim (cm): 40 x 50 x 67
                            Bypack3 weight (kg): 80

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 300.000
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 39
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 39
                            0 offres
                            LAM Rainbow TCP 9600SE II standalone with DSQ - Plasma Etch

                            Vintage: 1995
                            SN: 4323
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: metalpets
                            Former BelGaN MES/ERP name: TCP1

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 125 x 220 x 190
                            Mainframe weight (kg): 1500
                            Bypack1 dim (cm): 40 x 98 x 81
                            Bypack1 weight (kg): 200

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 150.000
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 200mm Plasma Etch
                            Numéro de lot 40
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 200mm Plasma Etch
                            Numéro de lot 40
                            4 offres
                            LAM Rainbow TCP 9600SE II standalone with DSQ - Plasma Etch

                            Wafersize: 200mm
                            Former BelGaN process: metalpets
                            Former BelGaN MES/ERP name: TCP10

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 125 x 220 x 190
                            Mainframe weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 154.500
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 41
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 41
                            1 offres
                            LAM Rainbow TCP 9600SE II standalone with DSQ - Plasma Etch

                            Vintage: 2002
                            SN: 4407
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: metalpets
                            Former BelGaN MES/ERP name: TCP2

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 125 x 220 x 190
                            Mainframe weight (kg): 1500
                            Bypack1 dim (cm): 40 x 98 x 81
                            Bypack1 weight (kg): 200

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 150.000
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 42
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 42
                            17 offres
                            LAM Rainbow TCP 9600SE II standalone with DSQ - Plasma Etch

                            Vintage: 2005+/-5j
                            SN: 42100
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: metalpets
                            Former BelGaN MES/ERP name: TCP3

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 125 x 220 x 190
                            Mainframe weight (kg): 1500
                            Bypack1 dim (cm): 40 x 98 x 81
                            Bypack1 weight (kg): 200

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 174.000
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 43
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 43
                            2 offres
                            LAM Rainbow TCP 9600SE II standalone with DSQ - Plasma Etch

                            Vintage: 2005+/-5j
                            SN: 4442
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: metalpets
                            Former BelGaN MES/ERP name: TCP4

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 125 x 220 x 190
                            Mainframe weight (kg): 1500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 151.500
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 44
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 44
                            0 offres
                            LAM Rainbow TCP 9600SE II standalone with DSQ - Plasma Etch

                            Vintage: 2005+/-5j
                            SN: 4291
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: metalpets
                            Former BelGaN MES/ERP name: TCP5

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 125 x 220 x 190
                            Mainframe weight (kg): 1500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 150.000
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 45
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 45
                            0 offres
                            LAM Rainbow TCP 9600SE II standalone with DSQ - Plasma Etch

                            Vintage: 2005+/-5j
                            SN: 4276
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: metalpets
                            Former BelGaN MES/ERP name: TCP6

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 125 x 220 x 190
                            Mainframe weight (kg): 1500
                            Bypack1 dim (cm): 50 x 50 x 25
                            Bypack1 weight (kg): 50

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 150.000
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 46
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 46
                            1 offres
                            LAM Rainbow TCP 9600SE II standalone with DSQ - Plasma Etch

                            Vintage: 2005+/-5j
                            SN: 4151
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: metalpets
                            Former BelGaN MES/ERP name: TCP7

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 125 x 220 x 190
                            Mainframe weight (kg): 1500

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 150.000
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 47
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 47
                            1 offres
                            LAM Rainbow TCP 9600SE II standalone with DSQ - Plasma Etch

                            Vintage: 2005+/-5j
                            SN: 4214
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: metalpets
                            Former BelGaN MES/ERP name: TCP8

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 125 x 220 x 190
                            Mainframe weight (kg): 1500
                            Bypack1 dim (cm): 50 x 50 x 25
                            Bypack1 weight (kg): 50

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 150.000
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 48
                            C LAM Rainbow TCP 9600SE II standalone with DSQ - 150mm Plasma Etch
                            Numéro de lot 48
                            1 offres
                            LAM Rainbow TCP 9600SE II standalone with DSQ - Plasma Etch

                            Vintage: 2005+/-5j
                            SN: 42211R
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN process: metalpets
                            Former BelGaN MES/ERP name: TCP9

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 125 x 220 x 190
                            Mainframe weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Offre la plus élevée € 150.000
                            C Canon FPA 2500 I3 - 150mm I-line Stepper
                            Numéro de lot 49
                            C Canon FPA 2500 I3 - 150mm I-line Stepper
                            Numéro de lot 49
                            0 offres
                            Canon FPA 2500 I3 - I-line Stepper

                            Vintage: 1994
                            SN: 402560
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: STEPPER11

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 224 x 255 x 250
                            Mainframe weight (kg): 2500
                            Bypack1 dim (cm): 60 x 95 x 177
                            Bypack1 weight (kg):
                            Bypack2 dim (cm): 66 x 85 x 200
                            Bypack2 weight (kg):
                            Bypack3 dim (cm): 62 x 64 x 193
                            Bypack3 weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 125.000
                            C Canon FPA 2500 I3 - 150mm I-line Stepper
                            Numéro de lot 50
                            C Canon FPA 2500 I3 - 150mm I-line Stepper
                            Numéro de lot 50
                            0 offres
                            Canon FPA 2500 I3 - I-line Stepper

                            Vintage: 1995
                            SN: 506481
                            Wafersize: 150mm
                            200mm convertible: Yes
                            Former BelGaN MES/ERP name: STEPPER7

                            Dimensions & weight estimates:
                            Mainframe dim (cm): 224 x 255 x 250
                            Mainframe weight (kg): 2500
                            Bypack1 dim (cm): 60 x 95 x 177
                            Bypack1 weight (kg):
                            Bypack2 dim (cm): 66 x 85 x 200
                            Bypack2 weight (kg):
                            Bypack3 dim (cm): 62 x 64 x 193
                            Bypack3 weight (kg):

                            Don't forget to check upcoming auctions at later dates of the compatible spare parts and subfab components to this tool.


                            semiconductor BelGaN waferfab fab fab2 mainframe equipment tool
                            Enchères clôturées
                            Enchère de départ € 125.000